...

Introduction

Overview

Requirements

In order for clustering to work, the Large Enterprise Edition is required. The standard Enterprise Edition will not work due to licensing restrictions. Clustering requires several layers to be prepared and configured:

• Load Balancers

  Chinese
  负载平衡器

  Thai
  โหลดบาลานเซอร์

• Application Servers

  Chinese
  应用服务器

  Thai
  เซิร์ฟเวอร์แอปพลิเคชัน

• Shared File Directory

  Chinese
  共享文件目录

  Thai
  ไดเรกทอรีไฟล์ที่ใช้ร่วมกัน

• Shared Database

  Chinese
  共享数据库

  Thai
  ฐานข้อมูลที่ใช้ร่วมกัน

Architecture

There are many ways to design the clustering architecture, but the core concepts will be similar. In this document, the architecture used is as follows:

Image Modified

Deployment and Configuration Guide

This guide describes the steps required to setup Joget LEE clustering. The exact steps will depend on the actual products used in each layer.

Pre-Deployment Requirements

Before the clustering installation can be done, the following prerequisites are needed:

Shared file directory

Common directory to be accessed by the application servers with read/write permissions. This directory is used to store shared configuration files, system generated files, and uploaded files. Verify that the shared directory is mounted on the application servers and that files can be accessed with read and write permissions.

Shared database

Common database to be accessed by the application servers with permission to select, update, delete, create and alter tables. Verify that the application servers can connect and query the shared database.

Application servers

Java web application server to be installed and running on each server in the cluster. Verify that each application server has been installed correctly and can be accessed with a web browser.

Session replication

Session replication to be configured on the application servers and network. Verify that session replication has been configured for each application server and the network.

Load balancer

Load balancer (hardware or software) to be installed and configured to direct traffic for requests beginning with /jw to the application servers. Verify that the load balancer has been installed and configured correctly so that web traffic is directed to the individual application servers.

Joget Clustering Configuration

It is important to ensure that the pre-deployment requirements have been verified. Once verified, the Joget specific steps are as follows:

Datasource Configuration

Configure the datasource properties files in the shared directory

1. Copy all the files and directories from the wflow directory of a Joget LEE bundle into the shared file directory.

   Chinese
   将文件app_datasource.properties和app_datasource-default.properties从标准Joget安装的wflow目录复制到共享文件目录中。

   Thai
   คัดลอกไฟล์และไดเร็กทอรีทั้งหมดจากไดเร็กทอรี wflow ของบันเดิล Joget LEE ไปยังไดเร็กทอรีไฟล์ที่แบ่งใช้

2. Edit app_datasourceEdit app_datasource-default.properties and set the database connection settings for the shared database, e.g. for MySQL, change the bold values below:

   Chinese
   编辑app_datasource-default.properties并设置共享数据库（例如MySQL）的数据库连接设置，更改下面的粗体值：

   Thai
   แก้ไข app_datasource-default.properties และตั้งค่าการเชื่อมต่อฐานข้อมูลสำหรับฐานข้อมูลที่ใช้ร่วมกัน (เช่น MySQL) และเปลี่ยนค่าตัวหนาดังต่อไปนี้:

   
   
   

workflowDriver=com.mysql.jdbc.DriverworkflowUrlDriver
workflowUrl=jdbc\:mysql\://host\:port/database_name?characterEncoding\=UTF-8
workflowUser=username
profileName=
workflowPassword=password

Application Deployment and Configuration

Deploy the Joget WAR file to the application servers and configure the startup properties to point to the shared directory.

1. Deploy the WAR file jw.war from the LEE bundle to each of the application servers e.g. for Apache Tomcat, copy the files into the webapps directory

   Chinese
   将WAR文件jw.war和jwdesigner.war从LEE包中部署到每个应用服务器，例如Apache Tomcat，将这些文件复制到tomcat webapps目录

   Thai
   ปรับใช้ไฟล์ WAR jw.war และ jwdesigner.war จากแพ็คเกจ LEE ไปยังแต่ละเซิร์ฟเวอร์แอปพลิเคชันเช่น Apache Tomcat และคัดลอกไฟล์เหล่านี้ไปยังไดเรกทอรี tomcat webapps

2. Add the following Java options in the application server startup e.g. for Apache Tomcat, modify the JAVA_OPTS line.

   Chinese
   在应用程序服务器启动中添加Java -wflow.home = shared_directory_path选项，例如，对于Apache Tomcat，请修改JAVA_OPTS行

   Thai
   เพิ่มตัวเลือก Java ต่อไปนี้ในแอปพลิเคชันเซิร์ฟเวอร์เริ่มต้นเช่น สำหรับ Apache Tomcat ให้แก้ไขบรรทัด JAVA_OPTS

   
   

   
   Note: You can download the wflow-cluster.jar from here. The "wflow-cluster.jar" option must be added before any other "-javaagent" option.
   
   

export JAVA_OPTS="-Xmx1024M -Dwflow.home=/shared_directory_path -javaagent:/shared_directory_path/wflow-cluster.jar -javaagent:/path_to/lib/aspectjweaver-1.8.5.jar -javaagent:/shared_directory_path/glowroot/glowroot.jar"glowroot/glowroot.jar"

License Activation

Activate license for each server. Each server has a unique system key and requires a separate license activation.

For more info about license activation, see Activate your Joget DX Enterprise License.

1. For each of the application servers, use the browser to directly access the Joget web console bypassing the load balancer e.g. http://server1:8080/jw/web/console/home

   Chinese
   对于每个应用程序服务器，使用浏览器直接访问Joget Web控制台，绕过负载平衡器，例如 {+} http：// server1：8080 / jw / web / console / home +

   Thai
   สำหรับแต่ละแอปพลิเคชันเซิร์ฟเวอร์ให้ใช้เบราว์เซอร์เพื่อเข้าถึง Joget เว็บคอนโซลโดยตรงผ่านตัวโหลดบาลานซ์เช่น http://server1:8080/jw/web/console/home +

2. Request for license and activate it using the link in the web console footer.

   Chinese
   请求许可证并使用的Web控制台页脚中的链接激活它。

   Thai
   ร้องขอใบอนุญาตและเปิดใช้งานโดยใช้ลิงก์ในส่วนท้ายของคอนโซลเว็บ

   
   Image Added

Post-Deployment Testing

Once the pre-deployment and clustering configuration has been done, the testing is a matter of using a web browser to access the load balancer.

Sample Installation and Configuration

This sample describes an installation using the following products:

ฐานข้อมูลที่ใช้ร่วมกัน

Create a Shared File Directory

Share a file directory to be accessed by the application servers. This directory is used to store configuration files, system generated files, and uploaded files.
In this sample, the shared file directory will be a directory /export/wflow in the file server

In the file server, install the NFS server

sudo apt-get install portmap nfs-kernel-server

Create shared directory and set permission

sudo mkdir -p /export/wflow
sudo chown nobody:nogroup /export/wflow

...

sudo vim /etc/exports 

...

/export/wflow 192.168.1.0/255.255.255.0(rw,no_subtree_check,async)

Export the shares and restart NFS service

sudo exportfs -ra
sudo service nfs-kernel-server restart 

...

Mount the Shared Directory in the Application Servers

In the application servers, install the NFS client

apt-get install nfs-common

...

sudo mkdir -p /opt/joget/shared/wflow
sudo chmod 777 /opt/joget/shared/wflow

Mount the shared directory.

sudo mount -t nfs wflow:/export/wflow /opt/joget/shared/wflow

...

echo test123 > /opt/joget/shared/wflow/test.txt

Create a Shared Database

Install MySQL ( https://help.ubuntu.com/18.04/serverguide/mysql.html)

...

...

sudo apt-get install mysql-server

...

mysql -u root 

Run the following MySQL commands to create a blank database

create database jwedb;
quit

...

mysql -uroot jwedb < /path/to/jwdb-mysql.sql

Configure database permissions

mysql -u root 

Run the following MySQL commands to grant permissions to user joget and password joget

grant all privileges on jwedb.* to 'joget'@'%' identified by 'joget';
flush privileges;
quit

...

sudo vim /etc/mysql/my.cnf 

Comment away the bind-address directive by adding a # in front of the line

#bind-address = 127.0.0.1 

Restart MySQL

sudo service mysql restart

...

mysql -h database_host -u joget -p

...

Deploy Application Servers

Install Apache Tomcat on each of the application servers. In each application server, run the following to extract tomcat into /opt/joget:

sudo mkdir -p /opt/joget/
sudo tar xvfz apache-tomcat-8.5.41.tar.gz /opt/joget/

Start each application server

sudo cd /opt/joget/apache-tomcat-8.5.41
sudo ./bin/catalina.sh start

...

Configure Application Server Session Replication

...

Configure Tomcat for clustering by editing apache-tomcat-8.5.41/conf/server.xml. Add jvmRoute="node01" to the Engine tag and uncomment the Cluster tag.

<Engine name="Catalina" defaultHost="localhost" jvmRoute="node01">
<Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>

Configure local domain IP. Verify that the local server name resolves to the IP and not 127.0.1.1. Assuming the server name is server1 and the IP is 192.168.1.10, edit /etc/hosts and set::

192.168.1.10 server1

...

sudo cd /opt/joget/apache-tomcat-8.5.41
sudo ./bin/catalina.sh stop
sudo ./bin/catalina.sh start

...

INFO: Starting clustering manager at localhost#/jw
Jan 17, 2016 11:21:32 AM org.apache.catalina.ha.session.DeltaManager getAllClusterSessions
INFO: Manager [localhost#/jw], requesting session state from org.apache.catalina.tribes.membership.MemberImpl[tcp://{127, 0, 0, 1}:4001,{127, 0, 0, 1},4001, alive=55733886, securePort=-1, UDP Port=-1, id={-57 118 -98 -98 110 -38 64 -68 -74 -25 -29 101 46 103 5 -48 }, payload={}, command={}, domain={}, ]. This operation will timeout if no session state has been received within 60 seconds.
Jan 17, 2016 11:21:32 AM org.apache.catalina.ha.session.DeltaManager waitForSendAllSessions
INFO: Manager [localhost#/jw]; session state send at 1/17/16 11:21 AM received in 104 ms.

...

Configure Load Balancer

In the load balancer server, install Apache HTTP Server 

sudo apt-get install apache2

Install proxy and balancer modules

sudo a2enmod headers proxy proxy_balancer proxy_http

If you are running Apache 2.4, you will need to also enable the following module.

sudo a2enmod lbmethod_byrequests

Configure a new site with the proxy and balancer modules. Create a new file in /etc/apache2/sites-available, named jwsite

sudo vim /etc/apache2/sites-available/jwsite.conf 

Add the contents

NameVirtualHost *
<VirtualHost *>
	DocumentRoot "/var/www/jwsite" 
	ServerName localhost
	ServerAdmin support@example.com
 	ErrorLog /var/log/apache2/jwsite-error.log
    CustomLog /var/log/apache2/jwsite-access.log combined
	DirectoryIndex index.html index.htm 
	<Proxy balancer://wscluster>
		BalancerMember ws://server1:8080 route=node01
		BalancerMember ws://server2:8080 route=node02
		Order deny,allow
		Allow from all
	</Proxy>
	ProxyPass /jw/web/applog balancer://wscluster/jw/web/applog stickysession=JSESSIONID|jsessionid
	ProxyPassReverse /jw/web/applog balancer://wscluster/jw/web/applog
	<Proxy balancer://cluster>
		BalancerMember http://server1:8080 route=node01
		BalancerMember http://server2:8080 route=node02
		Order deny,allow
		Allow from all
	</Proxy> 
	ProxyPass /jw balancer://cluster/jw stickysession=JSESSIONID|jsessionid
	ProxyPassReverse /jw balancer://cluster/jw
	ProxyPreserveHost On
</VirtualHost>

Enable the new site and restart Apache

sudo a2ensite jwsite
sudo service apache2 reload

...

Deploy and Configure Joget LEE

Deploy and configure Joget LEE as described earlier in 2.2 Joget Clustering Configuration